planned part's

Re: planned part's

feeds@yuku.com (gre8 ride 97) — Fri, 16 May 2008 15:22:52 GMT

thanx,i will get intouch with him,but i'll wait as i do have other ideas for now.

Re: planned part's

feeds@yuku.com (eg0rka) — Thu, 15 May 2008 13:56:50 GMT

Lonnie from blue ovals does Xcal2 http://www.blueovalchips.com/
he did mine
kinda expensive tho

make sure you got enough mods to make upgrade worth the $

i dont know about where to refer you to chips tho
Lonnie does them too i think

Re: planned part's

feeds@yuku.com (gre8 ride 97) — Wed, 14 May 2008 20:55:12 GMT

would you happen to know of a place that can come up with a burnt chip?

Re: planned part's

feeds@yuku.com (gre8 ride 97) — Wed, 14 May 2008 20:51:50 GMT

i was looking on line regarding this issue, came up with nothing.looked on tccoa & there info on maf sensors is a bit confusing.But i think you are right as it is computer related hardware.What do you think of the throttle body,I am new to the performance end of my car.

Re: planned part's

feeds@yuku.com (5LCougar) — Wed, 14 May 2008 18:28:17 GMT

eg0rka wrote:
if I am correct you cant just get a new MAF, plug it in and expect the car to run good unless you modify your ecu programing to work with that.

You are correct..

But to take Full advantage of the larger MAF sensor, have a Chip Burnt, or the EEC reflashed to work with it would be the better option.. Since the power gain that most aftermarket MAF Sensoris from leaning out your car, not the...

Re: planned part's

feeds@yuku.com (eg0rka) — Wed, 14 May 2008 15:29:04 GMT

if I am correct you cant just get a new MAF, plug it in and expect the car to run good unless you modify your ecu programing to work with that.

Re: planned part's

feeds@yuku.com (gre8 ride 97) — Tue, 13 May 2008 20:48:28 GMT

I checked onTCCOA &seen a article on what's needed & involved & is something i want to do to the car, espessialy since it's my daily.I'm also going to install 3.55 gears very soon.

Re: planned part's

feeds@yuku.com (5LCougar) — Tue, 13 May 2008 17:20:34 GMT

A J-mod is for all 4R70W transmissions.. No matter what it's behind..
Think of it as a Shift Kit using OE replacement Components.. And a J-mod with a Tranny cooler will Not only Make the transmission last alittle longer, And have updated Parts (specially if you move up to a '99+ 4R70W, or swap out the Valve bodies) it'll make the tranny Act more `performance' wise (IE chirp 2nd at WOT, Firmer shifts when in it a good amount BUT will have near `normal' shifts cruising...

Re: planned part's

feeds@yuku.com (gre8 ride 97) — Tue, 13 May 2008 16:50:06 GMT

Thanx John, i'll check it out.Bob

Re: planned part's

feeds@yuku.com (vtgecgrs) — Tue, 13 May 2008 16:26:24 GMT

try this
http://forums.tccoa.com/search.php?searchid=1497916

john

Re: planned part's

feeds@yuku.com (gre8 ride 97) — Tue, 13 May 2008 13:14:59 GMT

I Looked on tccoa, but came up with nothing.If you have a pic, i would love to see it.Thanx, Bob

Re: planned part's

feeds@yuku.com (vtgecgrs) — Mon, 12 May 2008 23:01:04 GMT

It is a modification to your 4 r70w transmission I believe it has something to do with you valve body. apparently the designer of the transmission design it to prolong the life of your transmission. You best bet is to look on the Tccoa for more information as it is not a typical mod for an sc for some reason. When I had my mark VIII it was recommended by the TCCoa members to inprove shifts and transmission life.
John

Re: planned part's

feeds@yuku.com (gre8 ride 97) — Mon, 12 May 2008 20:10:36 GMT

i have no idea what a j-mod is?

Re: planned part's

feeds@yuku.com (vtgecgrs) — Mon, 12 May 2008 18:03:12 GMT

373 gears are a good upgrade but either build up the tranny or do a j mod. a chip will help crispen up the shifts big time too. get a tune also once you get the boltons on the car it will make sure you get everything out of the mods.
John

Re: planned part's

feeds@yuku.com (5LCougar) — Mon, 12 May 2008 17:39:29 GMT

K&N Filter charger just replaces your stock air box and locates the Filter inside the engine compartment, not the best.. You should if you HAVE to keep it, make up a `box' to go around it.. Look around on TCCoA? they have some pictures.. of what i'm talking about.. Also maybe on here with Pats Car.. (I may even have a pic of it)

I would also do the Exhuast, J-mod, tranny Cooler, then Toss in a Chip into the mix for a what i'm told to be a fun car

planned part's

feeds@yuku.com (gre8 ride 97) — Mon, 12 May 2008 16:50:39 GMT

well all the parts i'm adding are bang for the buck.Today i picked up a k&n filter charger kit,by the weekend i plan on picking up C&L mass air flow sensor & 75mm bbk throttle body and install them all together.Car is a 97 t-Bird lx with a 4.6litre engine.Anybody with any input is encouraged to reply,I'm alway's open to suggestions.